How to carry out decoration and house inspection precautions

When renovating a house, every small detail should not be taken lightly, especially after the house is repaired. Owners must carefully inspect the floors, especially the bathroom and garden, which are the most prone to problems. Many owners may not be very familiar with the repaired and inspected houses, so they do not know what to pay attention to. Today, the editor will talk about the knowledge of repaired and inspected houses.
How to conduct decoration inspection?

1. Check the upper and lower water pipes of the Lifang and bathroom products to see if the drainage pipes are smooth and if the upper water pipes are leaking. Tip: You can fill the sink, sink, and bathtub with water and then drain them. At this point, you can check the oil level at the drainage outlet. For the weekly water inspection, the drainage test must be repeated.
2. Check the distribution lines and plugs. Tip: The simplest method is to turn on the light switch and check if all the lights are on. Also, bring a multimeter to check if each socket has power:
3. Check for empty spaces in the bedroom, bathroom, pond walls, floors, and other areas. Tip: Use a small rubber lithium to tap the honey brick with high pressure, and then listen for the sound. If the hollow drum speed exceeds 3%, it indicates the existence of quality problems
4. Check the wooden and painted products, and remind: carefully observe whether the wooden products are deformed, whether the cracks at the joint are tight, whether the hardware installation is firm, whether the paint is flowing, and whether the blue covering on the pond wall is widely cracked.
5. Carefully inspect the corners and hidden commercial areas. Tip: Pay attention to whether there is a waterproof layer on the bathroom door, whether there is rainwater on the window, whether there are scratches on the switch panel, and whether the installation position of the bathroom product is reasonable
6. Identify good brands and avoid using “fake brands”. Ensure that developers are required to provide decoration instructions to understand the buried project and how to use it. 7. When the owner purchases a floor, the sales staff emphasizes that it is a “finely repaired floor”, while the lobby is a “finely repaired floor”. Although this seems to be just a wrong word, all pronunciations mistakenly equate “finely repaired floor” with “finely repaired floor” and use it to evade responsibility.
   II Precautions for Home Inspection by Meixiu
   When inspecting the height of the house during decoration, a tape measure should be used to measure the height of the floor and check whether the actual height of the floor is consistent with the value of the purchase contract, and record the data. If any problems are found during the acceptance process, it is necessary to register and contact the developer or property management in a timely manner to seek solutions
7. Check the problem of hollowing on the performance walls and floors. After repairing the narrow room floor, check whether the walls and floors are spacious. The inspection method is to tap with a small lithium ion with the right hand and then listen for the empty sound. If it exists, it indicates the presence of hollowing phenomenon, and you should find someone to fix it as soon as possible. If the person to be repaired cannot be found, it is easy to penetrate the floor during the repair process, which will make the relationship between neighbors difficult. If there is a problem with the moisture surface, check the flatness of the wall surface. If there are water marks, such as on the top, outside, and other places, make sure to quickly identify the cause,